Volvo Penta reveals Stage V emissions concept for its engines

Volvo Penta announced its concept for Stage V emissions compliance at CONEXPO-CON/AGG. As with previous emission steps, the Stage V line-up includes all five engines from Volvo Penta’s range, including the D5, D8, D11, D13, and D16.
March 10, 2017 Read time: 1 min
Volvo Penta’s Stage V emissions concept was revealed at CONEXPO-CON/AGG

783 Volvo Penta announced its concept for Stage V emissions compliance at CONEXPO-CON/AGG. As with previous emission steps, the Stage V line-up includes all five engines from Volvo Penta’s range, including the D5, D8, D11, D13, and D16.

For Stage V, the engine platform gets a fixed geometry turbo, common-rail fuel injection system and uncooled exhaust gas recirculation. An electrical exhaust pressure governor and inlet throttle enable the system to function without the need to inject fuel into the exhaust stream to raise the temperature.

With this approach, Volvo Penta said the exhaust gas has an optimal temperature when it passes through the exhaust after treatment system. It added that low heat rejection from the entire system means less cooling is required.

Power remains unchanged, and extends from 105 to 565kW (143-770 hp) to suit industrial and off-road applications. The firm is ensuring compatibility with earlier emissions legislations by using the same hardware layout and re-using the electrical architecture to deliver consistency across different emission stages.

For more information on companies in this article

Related Content

  • Volvo Penta’s latest generation diesels meet low emissions targets
    March 7, 2018
    Volvo Penta has a full line-up of diesel engines for the 5, 8, 11, 13 and 16litre capacity range. These are available in low emissions, Stage V compliant variants. For the 5, 8 and 11 litre engines, particulate filters and SCR systems are used in the emissions control package to meet the stage V requirements. Meanwhile the 13 and 16litre engines feature an SCR system that is integrated with the particulate filter. Passive regeneration is used for the particulate filters, so there is no need to stop a machin
    Read More
  • Emissions regulation leads to efficiency gains
    November 6, 2012
    Innovative technology is use is providing efficient, clean burning engines - Mike Woof reports The development of new diesel engine technology has, for the off-highway equipment sector, been the single most expensive research field for the industry since these machines first started being manufactured. Aimed at reducing the emissions of nitrous oxide as well as particulate matter, in a phased series of stages the engine emission improvements will make major changes to the construction sector. In real world
    Read More
  • Volvo Penta gears up with new engines
    February 19, 2015
    Volvo Penta will show two newly-redesigned 5litre and 8litre engines and a complete range of common-platform units spanning all emission levels. The company’s Stage IV/Tier 4 Final D11 engine will be seen with the new Stage IV/Tier 4 Final-compliant 5litre and 8litre engines. Developed in coordination with the Volvo Group, the D5 and D8 engines feature a newly-designed platform, and are also available to meet Stage II/Tier 2, Stage IIIA/Tier 3 equivalent and Tier 4 Final/Stage IV emissions standards. This
    Read More
  • Volvo Penta gears up with new engines
    January 6, 2017
    Volvo Penta will show two newly-redesigned 5litre and 8litre engines and a complete range of common-platform units spanning all emission levels. The company’s Stage IV/Tier 4 Final D11 engine will be seen with the new Stage IV/Tier 4 Final-compliant 5litre and 8litre engines. Developed in coordination with the Volvo Group, the D5 and D8 engines feature a newly-designed platform, and are also available to meet Stage II/Tier 2, Stage IIIA/Tier 3 equivalent and Tier 4 Final/Stage IV emissions standards. This
    Read More

Highlighted Content